Reps
Counted on the sensor itself — no tapping, no guessing. A coloured dot per rep shows how it went.
A small sensor on the bar counts your reps, measures how fast the bar moves and tells you when to add weight — live on your phone, set after set.
Twenty times a second the sensor sends the bar's speed and position. The app turns that into a live path of every rep — and freezes the whole set when you rack the bar.
Illustration of a four-rep squat set. Numbers are an example, not a measurement.
Counted on the sensor itself — no tapping, no guessing. A coloured dot per rep shows how it went.
Peak bar speed for every rep, in metres per second. Slower reps mean you are closer to your limit.
Speed loss compares each rep with your fastest one. Under 20 % is easy, over 35 % is near the limit.
Choose how much you want to see — Simple, More or All. Beginners get reps and advice. Data nerds get every number.
| Rep | Depth | Peak | Force | Power | Lowering | Tilt | Loss |
|---|---|---|---|---|---|---|---|
| 1 | 42 cm | 0.84 | 1500 N | 824 W | 2.8 s | +1° | 0 % |
| 2 | 43 cm | 0.81 | 1480 N | 795 W | 2.9 s | +1° | 4 % |
| 3 | 41 cm | 0.77 | 1450 N | 755 W | 3.0 s | 0° | 8 % |
| 4 | 42 cm | 0.66 | 1380 N | 647 W | 3.1 s | −2° | 21 % |
| 5 | 40 cm | 0.53 | 1300 N | 520 W | 3.3 s | −3° | 37 % |
Example set at 100 kg, for illustration. Force and power use the bar weight.
SignalFitness puts small motion sensors on a gym's own barbells and dumbbells. Members train as usual — every rep turns into numbers like these.
No input needed — just lift.
8 reps
Half reps and walking the bar out of the rack don't count.
0.82 / 0.61 m/s
Bar speed shows how heavy the weight really is for you today.
46 cm
Same depth every rep means honest reps and sets you can compare.
3-1-1-0 s
Lowering, pause at the bottom, lifting, pause at the top — control you can see.
38 s
How long the muscle actually worked during the set.
+2 °
A bar that tips to one side can point to a weaker side.
5.2 m/s²
How hard you drive the bar out of the bottom.
0.31 s
Shorter means a more explosive start.
18 cm up
Where the bar is slowest — the spot to train.
Controlled 0.4 s pause
Tells a rebound from a real, controlled pause.
Smooth
Shaky reps often mean the weight is close to your limit.
35 °
Shows dumbbell twist in curls and presses.
No input needed.
−24 %
From best to last rep — the clearest sign of fatigue.
±2 cm · ±0.04 m/s
How alike your reps were in depth and speed.
2:30 rest · 34 s set
Too little rest and the next set suffers.
Go up +2.5 kg
Go up, stay or go down — one clear answer after each set.
Enter the weight on the bar and the physics follows.
1 500 N
How hard you pushed against the bar.
800 / 640 W
Strength and speed in one number.
690 W
Power only from the part of the lift where you push the bar up.
451 J
Energy you put into each rep.
620 N·s
Force over time — how long you kept pushing.
4 800 N/s
How fast you build force — key for explosive lifts.
800 kg × reps · 3.6 kJ
The total workload of a set or a session.
Worked out from your bar speed.
e1RM 102 kg
Know your max without testing it.
78 %
Pick the right load straight from bar speed.
2 reps
Stop with reps to spare — or push on purpose.
Readiness 94 %
Warm-up speed compared with your normal.
−12 % this session
Shows when today's session stops paying off.
0.98 → 0.42 m/s, 60 → 100 kg
Your own bar speed at every weight.
One tap or one number unlocks more.
1.4× body weight · 9 W/kg
More accurate force and power for squats and lunges, and strength you can compare.
Below parallel
Turns centimetres into a depth that means something for you.
Effort 8 → 2 reps left
Personalizes reps-left and weight advice.
Above typical for your group
See how you compare with typical values.
One on each bar end, or one in each dumbbell.
Left side 6 % slower
Differences in speed and height between your sides.
3.1 °
Measured at both ends for an exact angle.
L 10 · R 9 reps
Reps, depth and speed per arm on dumbbells.
Every session adds to the picture.
+8 % this week
Warns you if your load rises too fast.
+4 kg e1RM in 6 weeks
Estimated max, speed at the same weight, and power.
1.12 m/s fastest rep
Heaviest weight, most reps, fastest rep, highest power.
Legs 12 sets this week
Spot what you train too much — or too little.
≈ 180 kcal
A rough estimate for the session.
Gyms pay a subscription and get equipment and member data — always as anonymized totals.
6.2 h today · rack 3
Use per hour and per day for every bar and dumbbell.
Rack 2 most · EZ bar least
Buy what members use, drop what they don't.
17–19 busiest · 14 lifting now
Plan staff and classes around real traffic.
3 hard drops this week
Wear and maintenance alerts before things break.
22.5 kg dumbbell not seen in 2 days
Find missing or misplaced equipment fast.
9 members training less
Reach out before they cancel.
After every set the app reads your speed loss and gives one clear answer, with a button that sets the next weight for you.
Speed loss under 20 %. The set was easy.
+ one step20–35 %. Right where you want to be.
Keep it35–50 %. Heavy — stay, but take a longer break.
StayOver 50 %. Back off one step next set.
− one stepSet a tempo like 3-1-1-0 and the app beeps you through every rep: down for three, pause, drive up. It starts the moment the bar moves.
Defaults per exercise — edit any of them, type it as 3110 on the number pad.
Attach it along the bar shaft, let it lie still for a second, and lift. The counting runs on the sensor, so your phone just listens.
Counted on the sensor, with a vibration per rep.
The bar's path from your start position, drawn as you lift.
Up and down speed, ±1.5 m/s, on the All level.
The full set frozen on screen when you finish.
Green, yellow or red from your speed loss.
Depth, speed, lowering, tilt and loss for each rep.
Add, keep or drop — with a one-tap "Set X kg".
Lower, pause, lift and top — per exercise.
Counts down your break after every set.
Change reps or weight of the last saved set.
Pick how much detail you want to see.
Lost the sensor? Reconnects without reloading.
One tap to re-zero the sensor while it lies still.
Today, earlier days, weekly training days.
Try the whole app without a sensor.
No install. Bluefy on iPhone, Chrome elsewhere.
Put the sensor along the bar shaft and let it lie still for a second while it zeroes.
Open the app — in Bluefy on iPhone or Chrome on Android and desktop — and tap Connect.
Pick your exercise and weight. The app counts, graphs and coaches every rep.
No sensor yet? Turn on demo mode in Profile and watch a full set counted, graphed and coached. Try the demo →
Founder, SignalFitness
Questions, partnerships or a demo — get in touch.
Open the app, turn on demo mode and see a full set counted, graphed and coached — in under a minute.
Open the app